Point valve box for oxygen
1. Uses
This product is suitable for oxygen pipeline user points of metal gas welding, gas cutting, flame surface cleaning and hot working, and can also be used with oxygen bus in the above user points.
2. Structural characteristics
The external protection of this product is made of sky blue paint to prevent rust, and the valve box contact can be used for 1-4 welding torches or cutting torches respectively, or at the same time. Since each contact is equipped with a pressure reducer to avoid pressure and flow fluctuations during simultaneous use, all internal pipelines are made of stainless steel (1Cr18Ni9Ti). The valve box door is connected with a special lock for the box, which is convenient for centralized management and can avoid unsafe factors caused by energy waste and leakage caused by misoperation.
3. Product technical parameters
Point valve box for acetylene gas
1. Uses
This product is suitable for metal gas welding, gas cutting, flame surface cleaning and hot processing oxygen pipeline user points, and can also be used with dissolved acetylene cylinders in the above user points.
2. Structural characteristics
The external protection of this product adopts sky blue paint to prevent rust, and the valve box contact (including post tempering prevention device) can be used by 1-3 people separately, or at the same time. The instrument used can be directly observed through the peephole of the valve box panel, all the internal pipelines are made of high-quality carbon steel, and the valve box door is connected with a special lock for the box body, which is convenient for centralized management and can avoid unsafe factors caused by energy waste and leakage caused by misoperation.
Gas point valve box
It is mainly composed of filter, gas storage device with appropriate amount of fire-retardant filler), gas pressure reducer, diversion control device, dry gas tempering preventer, gas outlet joint (bundle) and box. There are 4-F14 mounting holes on the back of the cabinet for wall mounting. The front panel of the box is installed with inlet pressure gauge and each outlet pressure gauge, which can supply one or more cutting guns at the same time, convenient pressure regulation, stable pressure, safe and reliable, and is an ideal energy-saving equipment for gas and natural gas points.
Merit:
1. Due to the use of dry gas tempering preventer, it can work normally below zero degrees Celsius to prevent the freezing phenomenon of gas condensate when used in the northern region, which will affect its performance.
2. The total inlet pressure gauge and sub-pressure gauge are installed on the front panel of the box to directly monitor the pipeline pressure and use pressure.
3. Small size and beautiful appearance.
4. Easy installation, use and maintenance, long service life.
Precautions for gas point valve box
1. The working place should have good ventilation conditions.
2. The gas and natural gas entering the valve box should be clean gas.
3. The tempering preventer is used for a period of time, and if the gas flow rate is found to be unable to meet the production needs, it should be replaced in time.
4. The point valve box has done a tightness test when leaving the factory, and when the user installs, any connection part in the box shall not be loose, nor is it allowed to be strongly assembled, so as not to affect the performance of use.
Scope of application of gas point valve box
Gas and natural gas point valve box is suitable for metallurgy, chemical industry, shipping and other industries in gas and natural gas pipelines, used to adjust the pressure of gas and natural gas, prevent the occurrence of combustion and explosion accidents caused by gas and natural gas tempering, so as to ensure personal safety and the normal operation of equipment.
){kind=link}